Installation 1. Clean the sharp surface as well as Safe-o-Kids edge Cushions inner surfaces using any ordinary home cleaning solution. Wipe it dry. 2. Peel off the yellow backing layer of the double-sided tape provided with the edge Cushion. 4. Apply the tape to both inner surfaces of the edge cushion. 5. Remove the 3M backings from the surfaces of the edge cushion. 6. Carefully align the edge cushion so that it fits perfectly with the sharp surface without leaving any space. 7. Press tightly and hold the edge Cushion against the surface for at least one minute 8. Optionally, apply an additional designer protection layer over the edge Cushion for additional strength, life, and aesthetics. To Remove: - Start Removing the edge Cushion carefully from any one of the edges. DO NOT Use any chemicals/ sharp tools. - Clean the surface with a wet cloth, etc. as suitable